Over 4 Million Fashion Pieces from 50+ Marketplaces

Losi 1/10-1/8 ScaleTen-T Brand New Converted

Losi 1/10-1/8 ScaleTen-T Brand New Converted Photo Losi 1/10-1/8 ScaleTen-T Brand New Converted Large Photo

Okay folks This is a BRAND NEW Losi 1/10 Scale Remote Control Nitromethane Racing Truggy READY TO RUN completely converted to an 1/8 scale Buggy design. I have done many modification to this already Badd A!!. R/C Vehicle. Again I must state this is brand new never run
Fuel Tank modification With Losi Tank Pull not a zip tie covered in Fuel Hose .. This converted the factory equipped size tank from a 75cc to a 125cc thus extending the run time from 8 mins to nearly 15 to 16mins depending on the tune of the Engine .It's not a hack job (1) additional hole was drilled to accomplish this modification. All factory LOSI parts that were taken from an 8ightT 2.0 buggy for this conversion.
The (2) shoe Plastic/ (1)Spring configuration and Metal Flywheel, have been replaced with M2C 3 SHOE aluminium Proven Racing Clutch and Larger Aluminium Flywheel. Which comes with (2) additional tuning Springs Sets for driver preference (6) additional springs in all. This set-up Also allows you to use an optional, purchased seperately starter box if you choose to.
Front and rear Shocks Spring have been replaced with LOSI gold (Hard) Springs here again the preferred set-up.
The Front and Rear of this Buggy/Truggy have been equipped with T-Bone Racing Bumpers and to further protect the Rear of the Unit I have pancaked a DE Racing Skid Plate to the underside of the bumper.
It has been equipped with the 1/8 scale Steering Servo Fully Digital All metal geared. 140oz .16 sec speed specification. IT"s the servo that is used on the Bad Boy Losi XXL 1/8 scale 4X4 Monster Truck. A significant upgrade from stock servo.
Losi 17mmAluminium Hex and Drive Axles from the 810 buggy have been installed, this is a Direct replacement item which required no modifications to the suspension set-up. (just a little research)the axles utilize the same bearings and now you are able to use 1/8 scale buggy wheels and tires a very beneficial upgrade.This is a much better way to do this conversion instaed of use hex adpters which set the wheel out further changing the overall dynamics of the suspension and driveability.
A cosmetic upgrade is the customized LOSI 8ight 2.0 Buggy Body that was used to complete the transformation from Truggy to Buggy as well as the PROLINE High Downforce 1/8 Scale Wing.(PICTURED)
The Radio /Receiver set-up is top of the line it is the Spektrum DX3S DSM Sport System with Integrated Telementry which uses first in the industry Remote Onboard Start System(ROSS) until LOSI did it nobody had used this technology(PICTURED) A Very cool and innovative addition to the R/C world.
Included with the sale is all the original parts which were taken off and are BRAND NEW as Well.Including the Body(PICTURED)
Plus an additional set of Black 17mm Proline Split Six 1/8 Scale Wheels and Proline Knuckes with M2 compound inserts already Glued Ready to Run. Plus 1 Qty (4) New in the package Air Filter Foam Wraps Qty (1) New Air Filter Body and 1 New Qty (2) in package of Exhaust Springs.(Pictured)
this sale also comes with the original manuals and the original box and the little tool accessory kit that was provided with it All the new parts that came off of it are included and pictured.
So basically you will have a 2 in 1 Kit or you can sell the additional NEW parts and recoupe some of your money. not a bad deal I would have to say
If you choose to go back to the 1/10 scale set-up you are able to .Or you can just stick with the 1/8 scale Bad A!! Set-up that currently is on it. Thanks for looking.
The pictures here do not do this vehicle justice
Reasonable offers will be considered. Serious Inquiries Only
And if anyone is curious why I would put all the work into something like this and then sell it.
That's because I enjoy the challenge of the build my next project will be the LOSI XXL Monster 4x4 Truck.
Happy Motoring!!!!!!!! NO TRADES! Thank You.